Scale - Xerox 4635 User Interface Reference

Scale

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
Figure 3-14.
Description Use the Scale window to scale 300 spi fonts, forms, and logos to
their 600 spi equivalents. You must provide an input (300 spi)
file specification and an output (600 spi) file specification.
Parameters Input File ID: Enter the name of an existing file in either the
FNT, FRM, or LGO directory.
Output File ID: Enter the name of the file you want created in
the FN6, FR6, or LG6 directory. If no output file ID is specified,
the system uses the input filename with the appropriate FN6,
FR6, or LG6 filetype.
Overwrite Output Filename: Select this option to overwrite the
output filename without prompting.
Bit-Double Font/log Bitmaps: Select this option to bit-double
font or logo bitmaps instead of using interpolation.
Override Escapement Error Message: Select this option to
override the byte escapement error message, if the scaled font is
not used in Interpress printing or is used in Interpress printing
and justification is required. This option sets the width of large
characters to 255/600 (.425 in./11mm). Widths overridden in this
manner may yield "compressed" characters when used in
Interpress printing. Problem characters will typically be in 36-
point fonts and larger.
Notes The Scale task should not be interrupted while in progress. If an
interruption occurs, press <ENTER> to resume the process.
Files>Scale window
FILES WINDOWS
3-15