Using The Scroll Bars - Xerox 4635 User Interface Reference

USING THE PC UI
Scrolling text up and down
1-20
1. If necessary, press the <ESCAPE> key to remove the data
entry cursor from the window.
2. Position the cursor over a corner Move/Resize target
3. Press and continue to hold <CTRL>, then <ENTER> while
using the appropriate arrow keys to resize the window.
Figure 1-18. Resizing a window

Using the scroll bars

The scroll bars allow you to shift the display within a window.
The scroll bars are especially useful in the Command
Line/Message window.
Note If all of the information within a window is already displayed, the
scroll bars do not work.
To scroll text up, place the cursor in the arrow down target area,
depress the left mouse button or the <ENTER> key and hold.
Text scrolls from bottom to top. When you release the mouse
button or the <ENTER> key, the text stops scrolling. A single
click on the target moves the text one line of information to the
top.
To scroll text down, follow the above procedure, but place the
cursor on the arrow up target area.
Notes:
• You can also scroll text up and down by moving the white
box located inside the scroll bar. Move the box as follows:
1. Place the cursor inside the box.
2. Press the left mouse button and hold it down while you
"drag" the box up or down within the scroll bar. Text
within the window moves up or down accordingly.
• You can scroll text using only the keyboard in the following
manner:
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE