Stale Date - Xerox 4635 User Interface Reference

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE

Stale Date

Figure 8-34. Stale Date error window
The Stale Date window is displayed when there is a stale date
fault on an Audit Logged job. The stale date conditions are set
up through the BTEXT commands in the job stream. Please refer
to the Xerox 4635 LPS PDL/DJDE Reference manual for more
details on BTEXT commands.
One of three selections needs to be made when this window
appears.
• Ignore the error - This will Ignore the error on this report
only and a CONTINUE command will be sent to the printer.
• Ignore the error for the rest of the job - This will Ignore the
error on this report and all other reports in this job and a
CONTINUE command will be sent to the printer.
• Abort the job - This will abort the job that contains this
report. All other reports in this job that have not been
printed yet will be aborted.
The system is locked up until a selection is made and the
Apply/Close header button is selected.
SYSTEM CONTROL WINDOWS
8-37