Pc Ui Desktop - Xerox 4635 User Interface Reference

USING THE PC UI

PC UI desktop

1-8
The PC UI desktop is the basic display screen.
Figure 1-8. PC UI desktop
1. Status area. This area contains the date and time fields, the
Hint and Fault icons, MICR and Bar code icons, and the
Menu icons. Opening the Menu icons allows you to access
task windows.
Note: The icons you see depend on the level to which you
are signed on. Certain tasks are restricted to certain log-on
levels. You need a special password to access those tasks.
When changing log levels, the desktop is cleared of any
open windows, except for the Command Line/Message
window. The desktop is then reset according to the
specified log level.
2. Command Line/Message window. This window displays
system messages and allows you to enter commands for
performing LPS tasks. You can scroll through the messages
in this window (refer to the "Using the scrollbars" section
later in this chapter), and the window can be resized or
moved (refer to the "Resizing the windows" and "Moving the
windows" sections later in this chapter for instructions). This
window cannot be closed. The Command Line/Message
window contains the following header buttons:
• Clear faults. Select this button to clear printer software
faults (when directed by a message in the Command
Line/Message window or on the printer control console).
Selecting this button also causes any outstanding printer
faults to be displayed in the window.
Note: Entering CLEAR has the same effect as selecting
the Clear Faults button or touching the Clear button on
the printer control console.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE