Sfs Save - Xerox 4635 User Interface Reference

SFS Save

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
n prints the first n reports. For example, typing 5 and
pressing the <ENTER> key (or selecting the Apply header
button) prints the first five report entries in the SFS list.
-m (dash, a number) prints the last m reports in the list. For
example, entering -5 (dash 5) prints the last five report
entries in the SFS list.
n-m prints reports n through m inclusive. For example,
entering 10-15 prints the tenth through fifteenth report
entries in the list.
Destination: Select either Bin or Sample Tray to indicate where
you want the SFS printout sent. If the Test header button is
selected, the default destination is the sample tray.
Figure 2-5.
Description This window saves the contents of the status file to magnetic
tape. The status file can also be saved to tape from the File
Management Copy window.
Parameters Tape Device: TD0, TD1, TD2. Select/enter the tape device you
want to copy the status file to.
Format: ASCII, EBCDIC. Select/enter the tape format
Blocks: 80, 256, 512. Select/enter the block count.
Density: 1600, 6250. Select/enter the tape density.
Entries: Enter the range of report entries you want saved to
tape. Use the following options:
All saves the entire list of SFS report entries.
n saves the first n reports. For example, typing 5 and
pressing the <ENTER> key (or selecting the Apply header
button) saves the first five report entries in the SFS list.
Accounting>SFS Save window
ACCOUNTING WINDOWS
2-5