Moving The Cursor; Pc Ui Mouse - Xerox 4635 User Interface Reference

USING THE PC UI
Moving the cursor using the mouse
Moving the cursor using the arrow

PC UI mouse

1-6

Moving the cursor

You can move the cursor in either of two ways:
• Mouse
• Arrow keys.
To move the cursor using the mouse, lightly move the mouse
over the mouse pad. You may lift the mouse and put it down
again (gently) in a different position on the mouse pad if you
"run out of room" on the pad while you are moving it. (Lifting
the mouse and setting it down does not cause the cursor to
move.) Be sure that the mouse is touching the mouse pad.
To move the cursor using the arrow keys, make sure that the
keys <NUM LOCK> key is not activated. Then press the arrow key
pointing in the direction you want the cursor to move. You may
hold the arrow key down; however, the cursor moves very
quickly when you do this.
To select an input field with the arrow keys:
1. Press <ESCAPE> to remove the data entry cursor from the
screen.
2. Use the arrow keys to move the main cursor to the desired
input field.
3. Press <ENTER> to activate the input field. The data entry
cursor appears in the input field.
4. Use the arrow keys to move the data entry cursor within the
input field.
The PC UI mouse controls the movement of the cursor. Use the
mouse to position the cursor in order to select icons or options
on the desktop.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE