Compile Pdl - Xerox 4635 User Interface Reference

UTILITIES WINDOWS

Compile PDL

5-2
Figure 5-2.
Description Use this window to compile JSLs from the system disk or tape.
The PDL compilation process produces several output files
including a listing of source statements with error diagnostics and
a job descriptor library object file.
Parameters File Name: Enter the filename of a source .JSL file (file-type .JSL)
which is to be input to the PDL task. If no filename is specified,
source input for PDL is read from tape and a JDL disk file is
created for each SYSTEM command encountered in the first file
read from tape.
Device: Disk, TD0, TD1, TD2. Enter/select the source of the .JSL
file (system disk or tape).
If a tape device (TD0, TD1, TD2) is selected as the source, only
the first file on the unlabeled tape can be read.
Destination: Bin, Sample Tray. Select/enter the output
destination for the listings and diagnostics from the PDL
compilation.
Source File: Selecting this option creates .JSL source files when
the input is from tape. This option has no effect when input is
from disk.
Print: Selecting this option prints the PDL source records during
compilation, along with source records which contain errors, the
diagnostics which apply to those lines, and the PDL summary
reports. If an error occurs, a printout is produced even if the
Print option is not selected.
Replace: Selecting this option specifies that the PDL task may
replace an existing job control file with a new output file of the
same name.
Rewind: Selecting this option rewinds a tape after a tape file is
processed.
Utilities>Compile PDL window
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE