Abort - Xerox 4635 User Interface Reference

JOB CONTROL WINDOWS

Abort

7-2
Figure 7-2.
Description Use the Abort window to do any of the following:
• Remove a specific job or report from the system
• Remove all job/report information currently being processed
• Cause the current print job to stop printing (printing
continues with the next report)
• Cause the currently active non-print task (such as FDL or
PDL) to abort (there must be no active print jobs when this
command is entered).
After applying your selection, a message appears asking you to
confirm the abort command.
Parameters Output: Select the Output button to cause the current job to
stop printing.
Input: Select the Input button to remove only the print job
currently being input into the system. The next job begins
processing.
Job Number: Enter the job number of a specific print job you
want to remove from the system.
Non-Print Task: Select this button to abort a non-print task,
such as FDL or PDL.
Notes This feature is available only when there is a print or non-print
task active.
When aborting input:
Input processing stops, but output processing continues.
Any data already processed by the input processor, but not
yet received by the output processor is deleted.
If an aborted job had already begun printing, the output is
appended with an accounting sheet which indicates that the
job was aborted and that the printed job is incomplete.
Job Control>Abort window
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE