Reallocate - Xerox 4635 User Interface Reference

Reallocate

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
Figure 4-8.
Description Use this window to set the size of the system print file on disk.
You may also specify the raster image file size. The system must
be idle to perform the Reallocation process.
Parameters Print File Size:
Current: If a print file already exists, selecting Current creates a
print file of the same size. If a print file does not currently exist,
selecting Current creates a print file of the default size (400
cylinders).
Default: Selecting Default creates a print file of 400 cylinders
(default size).
Interactive Process: Selecting this option followed by
Apply/Close or Apply displays the Reallocate: Print File Data
window. Refer to figure 4-9. The Print File Data window displays
the number of cylinders and sectors in the current print file, and
asks if you would like to reallocate a different size print file.
Refer to figure 4-10.
Cylinders: Enter the desired cylinder size for the print file you
want to create. 400 cylinders is the recommended print file size.
If the cylinder size you enter exceeds the cylinders available, the
system will create a print file with the largest cylinder size
possible. If the cylinder size you enter is less than 65, the system
will exit the process and send a message that the requested print
file size is too small.
Disks>Reallocate window
DISK WINDOWS
4-7