Copy To/From Floppy - Xerox 4635 User Interface Reference

FILES WINDOWS

Copy To/From Floppy

3-10
Figure 3-8.
Description Select the Copy To/From Floppy option from the Files menu to
back up files to floppy diskette, or to restore rigid disk files.
Header button Format: Select this header button to format the floppy diskette.
The first time a floppy diskette is used, it must be formatted and
initialized.
Initialize: Select this header button to intialize the floppy
diskette. The first time a floppy diskette is used, it must be
formatted and initialized.
Parameters Copy: Save to Floppy, Restore to Disk. Select the appropriate
operation.
Disk ID: Default, DP0, DP1, DP2, DP3.
Input File ID: Enter the name of the file to save or restore.
Masking is allowed.
Output File ID: Enter the name of the output file if you want it
to exist on the floppy diskette or rigid disk under a different
name.
Review: Select this option if you want the system to warn you
when a file from the source device will replace a file of the same
name on the destination device. The warning gives you the
option to overwrite the destination file or cancel the operation.
Files>Copy To/From Floppy window
To save to floppy: Select/enter the rigid disk that contains the
file to be saved. To search all disks for the file, select
Default. This is the same as entering the FLOPPY SAVE
command with no disk ID specified.
To copy from floppy: Select/enter the rigid disk to which you
want the file restored.
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE