Sfs Clear/Create - Xerox 4635 User Interface Reference

ACCOUNTING WINDOWS

SFS Clear/Create

2-6
-m (dash, a number) saves the last m reports in the list. For
example, entering -5 (dash 5) saves the last five report entries
in the SFS list.
n-m saves reports n through m inclusive. For example,
entering 10-15 saves the tenth through fifteenth report
entries in the list. Separate sets of entries cannot be saved.
Figure 2-6.
Description Use this window to clear the contents of the status file or to
create a new status file of a different size. The status file can also
be created at sysgen.
Parameters Clear/Create: Select Clear to clear the status file. Select Create
to create a new status file.
Size (Blocks): 667, 34. The Size parameter is available for the
Create option only. Select/enter the desired size in blocks of the
new status file. The last value entered becomes the default.
Warning/Frequency Flags: The warning flag indicates that the
logical end of the status file is approaching. The default for the
warning flag is 40, meaning a warning flag is displayed when
there are only 40 entries available in the status file. The last
number entered becomes the default.
Frequency flags determine how many times warning flags are
displayed. The default number of frequency flags is 3, meaning a
warning flag is displayed three times to notify you that the status
file is nearly full.
Accounting>SFS Clear/Create window
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE