System Version; Attention Light/Alarm - Xerox 4635 User Interface Reference

SYSTEM CONTROL WINDOWS

System Version

Attention Light/Alarm

8-6
Figure 8-6.
Description Use the System Version window to display the system version
number, the disk ID, the PC UI version number, and the current
logon level. This window is for display only; no changes can be
made from this window.
Figure 8-7.
Description Use the Attention Light/Alarm window to enable or disable the
attention light and/or alarm.
The Attention light can be enabled or disabled for either or both
modes—steady and flashing. If, for example, you disable the
steady mode of the Attention light, but leave the flashing mode
enabled, the Attention light does not go on when a condition
such as low toner occurs, but the Attention light still flashes
when the printer stops.
Parameters Steady Light:
Enabled. Select this button to enable the Steady Attention light
located on top of the printer.
System Control>System Version window
System Control>Attention Light/Alarm window
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE