Change Logon Class Level - Xerox 4635 User Interface Reference

SYSTEM CONTROL WINDOWS

Change Logon Class Level

8-2
Figure 8-2.
Description Use this window to access a different logon level by entering the
appropriate password. Restricted features and functions are
determined at your site by the Restrict Command Usage (RCU)
task (refer to description below). When changing logon class
levels, any open windows are cleared from the desktop.
Features at a lower logon level are always available. When going
from a higher logon level to a lower logon level, it is not
necessary to enter a password, except when logging down from
level 5 to level 4 or 3.
Parameters Enter the log level you want to access and the password for that
logon level. The password is not displayed as it is being entered.
Asterisks are displayed to represent the characters as they are
entered. Entering the correct password gives you access to the
new logon level's features.
System Control>Change Logon Class Level
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE