File Id (Fid); Dump - Xerox 4635 User Interface Reference

File ID (FID)

Dump

XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE
Figure 5-5.
Description Use the File ID window to create a prototype (template)
command file.
Parameters Disk ID: DP0, DP1, DP2, DP3. Select/enter the system disk
which the file will be created on.
File ID: Select/enter the file name and file type of the prototype
command file to be created. If the file ID contains only the file
name, the file is generated using a command file extension
(.CMD). If both the file name and file type are used, the file that
is created contains only the name and type specified.
File Type: Select/enter the specific file directory type from which
the individual records of the command file are to be built. These
records may be edited to produce a command file for
manipulating a subset of file type (for example, deleting a subset
of the current fonts in the FNT directory).
Note A message displays when the task is complete.
Description The Dump utility lists the contents of a file. The listing can be a
range of disk or tape blocks.
The Dump utility does not have an options window. Tasks are
performed by keying in commands in a command line.
The system must be idle and you must have the appropriate
logon level to access this utility.
Utilities>File ID window
UTILITIES WINDOWS
5-5