Display/Print - Xerox 4635 User Interface Reference

FILES WINDOWS

Display/Print

3-2
Figure 3-2.
Description Use this window to display and print information on files residing
on the system disk and on tape. The abbreviated display/printout
for files on disk contains the File ID (File Name and File Type).
Header buttons Display: Selecting the Display header button (or pressing
<ENTER>) displays the file information you specify. Press
<CTRL><X> to cancel the display in the Display window.
Paged Display: Select this header button to view the file
information listing page by page in the Command Line/Message
window. Press the <ENTER> key to page through the listing.
Print: Selecting this header button prints a hardcopy of the file
information you have specified.
Rewind: If a tape drive is selected as the source device,
selecting the Rewind header button rewinds the specified tape.
Unload: If a tape drive is selected as the source device,
selecting the Unload header button rewinds and unloads the
tape on the drive.
Parameters Device: All Disks, DP0, DP1, DP2, DP3, TD0, TD1, TD2, Floppy.
Select/enter the system disk or tape reference.
Three different tape devices are supported by this task: reel-to-
reel (9-track), 3480 (18-track cartridge), and streamer (26-track
cartridge). Tape devices are referenced by TD0, TD1, and TD2.
At sysgen, you may assign a tape device reference (TD0, TD1,
TD2) to one of your tape devices, otherwise the system default
assignments are used. Default assignments are as follows:
TD0=9-track, TD1=26-track, and TD2=18-track.
Files>Display/Print window
XEROX 4635 LASER PRINTING SYSTEM PC USER INTERFACE REFERENCE