Table of Contents
Advertisement
Printing and Copying Documents
There are two features available:
• Scale Factor: The Scale Factor is set by pressing the increase and decrease arrows for
25-400% in single increments and selecting Auto, or by entering in numbers using
the numeric entry keypad.
• Presets and More: The Presets and More feature displays a Scale Factor screen to
allow Variable or Perset Percentages. You can customize one percentage value as
desired.
Reduce/Enlarge Using the Scale Factor
1. Select Copy on the Services menu.
2. Select the Reduce/Enlarge percentage using the scale factor increase and decrease
buttons or select the 100% button.
3. If you select the 100%, you can then enter the desired percentage manually from
the numeric entry keypad.
4. Select Enter.
Reduce/Enlarge Using Presets and More
To select a reduction/enlargement ratio that does not appear on the Copy screen, follow
the steps below:
1. Select Presets and More on the Basic Copy tab below Reduce/Enlarge.
The Scale Factor screen displays.
2. Select from either the Variable Percentage or Preset Percentage as desired.
• Manual: You can enter any ratio between 25% and 400% in 0.1% increments.
Enter the value using the numeric keypad. The machine does not accept a value
that is out of range.
• Auto: The ratio is automatically set up based on the original document size and
the installed media size. The document is copied to fit the currently selected media.
• Presets: Select any of the preset ratios.
Refer to Media Settings in the Product Overview chapter and verify the correct settings
are present.
3. Select Save.
Refer to Select Custom Reduction and Enlargement in the System Administration chapter,
for details on changing these custom presets percentages.
2-10
®
Xerox
Wide Format 6604/6605 Solution
User Guide
Advertisement
Table of Contents
