Polycom VSX 7000 Administrator's Manual page 50

VSX 7000 Series Administrator's Guide
50
5. On the System Info screen, select the other actions you want to occur during
the update:
• Remove Address Book—Check this option to delete your existing
directory before the update.
• Remove System Files—Check this option to delete your existing system
files before installing new system files.
• Allow System to be a DHCP Server—Check this option to allow this
system to act as a DHCP server. If the system is on a LAN with other
computers, the system will provide IP addresses to the other computers.
In order to use this feature after the upgrade, you must enable it at System
> Admin Settings > LAN Properties. If you do not check this option
during the software update, the Server option will not be available on the
LAN Properties screen.
Do not select Allow System to be a DHCP Server if your VSX system is on a
LAN. If you do, the VSX system will provide IP addresses to the other
computers on the LAN even though the LAN already has a DHCP server. Your
IT personnel and system administrators will have to repair any network
problems this causes.
6. Click Continue to upgrade the software.
Do not power off the system during the software upgrade process. If the upgrade
is interrupted, the system reverts to its original software version.
Caution
Caution
www.polycom.com/videodocumentation