Brocade Communications Systems LS-STK Installation Manual page 57

•
•
•
•
Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide
53-1002187-01
DRAFT: BROCADE CONFIDENTIAL
Verify that the Brocade device and the connected device are both powered on and operating
correctly.
Verify that you have used the correct cable type for the connection:
•
For twisted-pair connections to an end node, use straight-through cabling.
•
For fiber optic connections, verify that the transmit port on the device is connected to the
receive port on the connected device, and that the receive port on the device is connected
to the transmit port on the connected device.
You can use the CLI to verify that the port has not been disabled through a configuration
change. If you have configured an IP address on the device, you also can use the Web
Management Interface or IronView.
If the other procedures do not resolve the problem, try using a different port or a different
cable.
Troubleshooting network connections
4
47