Installing An Fls Or Fls-Stk Device; Unpacking A System; Package Contents For Standalone Fls Devices; Package Contents For Fls-Stk Devices - Brocade Communications Systems LS-STK Installation Manual

Installing an FLS or FLS-STK device

Unpacking a system

DANGER
The procedures in this manual are intended for qualified service personnel.
This chapter describes how to physically install a FastIron LS or FastIron LS-STK device.
For information about configuring IP addresses and connecting network devices, see
"Connecting Network Devices and Checking
For information about configuring an IronStack using FLS624-STK and FLS648-STK devices, see
the FastIron Configuration Guide.
Brocade FLS and FLS-STK devices ship with all of the items listed below. Please review this list and
verify the contents of your shipping container. If any items are missing, please contact the place of
purchase.
FLS624-STK and FLS648-STK devices come with a 0.5 meter 10GBASE CX4 cable.

Package contents for standalone FLS devices

Package contents for standalone FLS devices include:
•
•
•
•

Package contents for FLS-STK devices

Package contents for FLS-STK devices included:
•
•
•
•
•
•
Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide
53-1002187-01
DRAFT: BROCADE CONFIDENTIAL
FastIron LS device
115V AC power cable (for AC devices)
Rack mount brackets
Warranty card
FastIron LS-STK device
115V AC power cable (for AC devices)
Rack mount brackets
Warranty card
10GBASE CX4 (FLS624-STK only)
0.5m CX4 cable
Connectivity".
Chapter
2
Chapter 4,
9