Control Features - Brocade Communications Systems LS-STK Installation Manual

1
Hardware features
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5

Control features

The front panel on each device includes the following control features:
•
•
Serial management interface (Console port)
The serial management interface allows you to configure and manage the device using a
third-party terminal emulation application on a directly connected PC. A straight-through EIA or TIA
DB-9 serial cable (M or F) ships with the device. The serial management interface (the Console
port) is located in the right corner of the front panel.
Reset button
The reset button allows you to restart the system without removing power or using the CLI or Web
Management Interface. The button is located to the left of the serial management interface and is
recessed to prevent it from being pushed accidentally.
FastIron LS and LS-STK network interfaces
FLS and FLS-STK devices provide the following interfaces:
•
•
2
DRAFT: BROCADE CONFIDENTIAL
FastIron LS 648 and FastIron LS 648-STK front panel
FastIron LS 624 and 648 rear panel
FastIron LS 624 or FastIron LS 624-STK front panel with optional module installed
FastIron LS 624-STK and FastIron LS 648-STK rear panel
Serial management interface (the port labeled Console)
Reset button
10/100/1000 Mbps ports with RJ45 copper connectors
100/1000 Mbps ports with mini-GBIC slots for SFP MSA-compliant fiber transceivers
Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide
Fastlron LS 648
FLS 648
RPS DC In 1 2V 13A
100-240V~
50-60Hz 2A
Fastlron LS 624
FLS 624
RPS DC In 1 2V 13A
100-240V~
50-60Hz 2A
53-1002187-01