FIGURE 30
1
3
5
8. To replace the memory DIMM, see
9. Slide the new DIMM into the holder at an angle (see
10. Push straight down on the DIMM to lock it into place in the holder.
Brocade FastIron LS and FastIron LS-STK Hardware Installation Guide
53-1002187-01
DRAFT: BROCADE CONFIDENTIAL
EEPROM socket U2 and memory DIMM locations on FLS 648 devices
3
FLS648 Front Panel
Memory DIMM
Pin 1
the tabs apart. Lift the old DIMM up and pull it out of the holder.
into the holder until it snaps into place.
1
2
2
FLS Rear Panel
4
Socket U2
6
EEPROM
Figure 31
on page 34. Open the DIMM holder by pushing
Figure
Upgrading hardware
4
5
6
31) and push the connector end
3
33