Develop Release Sensor Pcb Assy/Mono Solenoid Assy - Brother DCP-9055CDN Service Manual

9.55 Develop Release Sensor PCB ASSY/Mono Solenoid ASSY

(1) Remove the three Taptite cup S M3x6 SR screws to remove the Top drive cover from the
Top drive ASSY.
Top drive cover
Top drive ASSY
(2) Turn the Top drive cover upside down and disconnect the wiring of the Develop release
sensor PCB ASSY.
(3) Release the Hook to remove the Develop release sensor PCB ASSY from the Top drive
cover.
Develop release sensor PCB ASSY
Taptite cup S M3x6 SR
Fig. 3-184
3c
3a
Hook
Fig. 3-185
3b
3-133
Taptite cup S M3x6 SR
Top drive cover
Confidential