Brother DCP-9055CDN Service Manual page 111

■ Error code 90
Size Mismatch
Reload correct paper.
The paper size of the MP tray does not match that of the print setting.
Error code 91
Size Mismatch
Reload correct paper.
The paper size of the paper tray 1 does not match that of the print setting.
Error code 92
Size Mismatch
Reload correct paper.
The paper size of the paper tray 2 does not match that of the print setting.
Error code 93
No Paper
Reload paper in MP Tray.
No paper in MP tray.
Error code 94
No Paper
Reload paper in Tray 1.
No paper in paper tray 1.
Error code 95
No Paper
Reload paper in Tray 2.
No paper in paper tray 2.
Error code 96
No Paper
Load <size> paper in Tray.
No paper in all trays.
This error does not usually occur in the normal use. The conceivable causes are noise around
the installation site, fluctuation of the power supply voltage, and failures in the software.
<User Check>
- Turn OFF the power switch, and turn it ON again after a while.
Step
1 Main PCB failure
Cause
2-73
Remedy
Replace the main PCB ASSY.
Confidential