Installing Procedure - Brother DCP-9055CDN Service Manual

Assembling Note:
Since the Second side CIS harness might be broken when you remove it from the FFC holder
ASSY, be sure to replace it with a new Second side CIS harness. When assembling a new
Second side CIS harness, be sure to assemble it in accordance with the following procedure.
< Installing procedure>
(1) Fold the Second side CIS harness at the Second side CIS side as shown in the
how-to-fold figure below.
(2) Mount the Second side CIS harness at the Second side CIS side to the Second side
scanning CIS.
Second side CIS harness
Reinforcement tape
Fig. 3-88
Fig. 3-89
Fold down FFC along with the solid line
Fold up FFC along with the dotted line
Second side CIS harness
Second side scanning CIS
3-76
Reinforcement plate
1 mm
Confidential