Develop Release Sensor Pcb Assy - Brother DCP-9010CN Service Manual

8.87 Develop Release Sensor PCB ASSY

(1) Remove the Film from the Side frame R.
(2) Remove the Taptite cup B M3x8 screw, and then release the Hook to remove the Develop
release sensor PCB ASSY from the Side frame R.
Develop release sensor PCB ASSY
Harness routing: Refer to
Film
Side frame R
Fig. 5-263
Hook
Side frame R
Fig. 5-264
" Develop Release Sensor PCB ASSY, Top Cover Open Switch,
Toner LED PCB ASSY."
5-199
Taptite cup B M3x8
Confidential