Brother DCP-9055CDN Service Manual page 425

LCD
AutoFF
AutoFF Time
FF Surpress
Auto LF
Auto CR
Auto WRAP
Auto Skip
Left Margin
Right Margin
Top Margin
Bottom Margin
Lines
Error Print
■ Detail description
LCD
Manual Feed
Resolution
Toner Save
Density
JB-Can Time
Sleep Time
Description
Switching of the auto form feed
Switching of the time-out period
of the auto form feed
Switching of the FF Suppress
Switching of the auto LF
Switching of the auto CR
Switching of the auto CRLF at
the print width
Switching of the Skip at the
backend/tip of the paper
Switching of the margin at the
left end
Switching of the margin at the
right end
Switching of the margin at the
upper end
Switching of the margin at the
bottom end
Number of the text lines in the
page
Switching of the ErrorPrint of
the PostScript
Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/Fontlist/Configuration from the panel. When
select the tray on the computer, the setting becomes effective. And this
setting is ignored.
Effective only for the print from the computer. When set the Resolution
on the computer, the setting becomes effective. And this setting is
ignored.
Effective for all print, and change the setting of the Function Menu.
However, as for the Copy, this setting becomes invalid. When set the
Toner Save or the computer, the setting becomes effective. And this
setting is ignored.
Effective for the print from the computer, or for the print of the
NetWorkConfig/TestPrint/FontList/Configuration from the panel. Link the
setting of the Toner Save. Judge the both setting, and decide the
density. When set the Density or the computer, the setting becomes
effective. And this setting is ignored.
Configure the setting for until the host time-out at the Job Cancel. The
setting value is the second time scale.
Configure the setting for the time until shift to the Sleep Time. Change
the setting of the Function Menu.
5-26
Set value
On/Off
1 to 99 (seconds)
On/Off
On/Off
On/Off
On/Off
On/Off
0 to 145 (columus)
10 to 155 (columus)
0 to 2.00 (inches)
0 to 2.00 (inches)
5 to 128 (lines)
On/Off
Detail description
Initial
value
Off
5
Off
Off
Off
Off
On
0
80
0.5
0.5
60
On
Confidential