Pf Encoder Disk And Pf Encoder Sensor Pcb Assy - Brother DCP-J4110DW Service Manual

9.32 PF Encoder Disk and PF Encoder Sensor PCB ASSY

(1) Remove the PF encoder disk.
PF encoder disk
PF encoder harness
Lower cover
(3_095_E)
Note: Once removed, the PF encoder disk should be replaced with a new one.
Assembling Note: When attaching the PF encoder disk, using a spatular tool makes the job
easier. Put on clean gloves to protect the disk surface from dust or fingerprints.
(2) Remove the paper feed roller belt.
Paper feed roller belt
PF encoder harness
Lower cover
(3_096_1_E)
Assembling Note: When setting the paper feed roller belt, first fit it over the motor gear and
then over the paper feed roller shaft.
3-110
Confidential