Cleaner Pinch Roller Holder - Brother DCP-9055CDN Service Manual

9.69 Cleaner Pinch Roller Holder

(1) Remove the two Pins and release the one Hook to remove the Front chute flapper and
two Flapper springs from the Low-voltage power supply unit.
Pin
Flapper spring
Low-voltage power supply unit
(2) Press the stopper, and then slide the Cleaner pinch roller to remove it from the
Low-voltage power supply unit.
Cleaner pinch roller holder
Low-voltage power supply unit
Front chute flapper
Fig. 3-217
2b
Fig. 3-218
3-154
Pin
Hook
stopper
2c
2a
Flapper spring
Confidential