Brother DCP-9055CDN Service Manual page 441

■ Reset of inter-color position alignment adjustment (manual)
If adjustment of inter-color position alignment (both auto and manual) cannot be executed
because an incorrect value is inputted in adjustment of inter-color position alignment (manual),
etc., you can clear the input value for adjustment of inter-color position alignment (manual).
<Operating procedure>
(1) Press the 6 button twice in the initial state of the maintenance mode. "REGISTRATION"
is displayed on the LCD.
(2) Press the or
the OK button.
(3) Display "PLEASE WAIT" on the LCD.
If you want to perform adjustment of inter-color position alignment again, you may as well
conduct adjustment of inter-color position alignment (auto) of Function code 66.
button to display "MANUAL REG RESET" on the LCD, and then press
5-42
Confidential