Brother DCP-9055CDN Service Manual page 252

Assembling Note:
There are cases where the ADF spring enters the Upper document chute ASSY from the
mounting hole of the Separation rubber holder ASSY. In this case, remove the Upper
document chute ASSY from the ADF unit and take out the ADF spring. In the case that the
Upper document chute ASSY has been removed, be sure to assemble the ADF spring
and Separation rubber first, and then assemble the Upper document chute ASSY to the
ADF unit.
Hole
ADF spring
Upper document chute ASSY
Fig. 3-79
3-71
Confidential