Printout Of Scanning Compensation Data (Function Code 05) - Brother DCP-9055CDN Service Manual

1.4.2

Printout of scanning compensation data (Function code 05)

<Function>
The machine prints out the white and black level data for scanning compensation.
<Operating procedure>
Note:
- Be sure to execute this operating procedure not immediately after the power is turned
ON, but after conducting the document scanning operation at least once in duplex
scanning. Since the machine initializes the white and black level data and obtains the
standard value for document scanning compensation when starting scanning the
document, the correct data for compensation cannot be printed out even if this operation is
implemented without scanning the document.
- The print result varies depending on whether implementing color scanning or black and
white scanning immediately before this operating procedure. Make sure the white and
black level data you want to print and implement the operation below.
(1) For white and black scanning, copy the document. For color scanning, implement color
copy of the document.
(2) Press the 0 and 5 buttons in this order in the initial state of the maintenance mode. The
"1. Front 2. Back" will appear on the LCD.
(3) When the 1 button or 2 button is selected, the equipment prints out the scanning
compensation data list (Refer to
following:
■ Black and white/color scanning (First side)
Note:
In the case of the black and white scanning, the output data (B) and (R) are invalid.
a) Black and white data graph
b) LED CURRENT DATA
c) LED pulse data 1(UP) (G)
d) LED pulse data 1(DOWN) (G)
e) LED pulse data 1(UP) (B)
f) LED pulse data 1(DOWN) (B)
g) LED pulse data 1(UP) (R)
h) LED pulse data 1(DOWN) (R)
i) LED pulse data 2(UP) (G)
j) LED pulse data 2(DOWN) (G)
k) LED pulse data 2(UP) (B)
l) LED pulse data 2(DOWN) (B)
m) LED pulse data 2(UP) (R)
n) LED pulse data 2(DOWN) (R)
o) OFFSET (AFE parameter)
p) GAIN (AFE parameter)
q) Background color compensated data
r) Black level data
s) White level data (G)
t) White level data (B)
u) White level data (R)
Fig. 5-1, Fig. 5-2, Fig. 5-3
by previous scanning pixel count
1 Byte
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
2 Bytes
1 Byte
2 Bytes
1 Byte
by previous scanning pixel count
by previous scanning pixel count
by previous scanning pixel count
by previous scanning pixel count
5-4
and Fig. 5-4) containing the
Confidential