2.2
Parts Life Reset Function
This function is used to reset the relevant part counter when the user replaced a periodical
replacement part with the correct procedure, and also used to forcibly reset the relevant part
counter when an error cannot be resolved because the user did not replace a consumable part
with the correct procedure.
(1) Press the 3 and 9 buttons at the same time in the ready state.
(2) The "Reset Menu" will appear on the LCD. Select the applicable periodical replacement
part or consumable part by pressing the
<Periodical replacement parts or consumable part are indicated on the LCD>
- Drum unit
- Belt unit
- PF kit MP
- PF kit 1
- PF kit 2
- Fuser
- Laser
(3) Once "
(4) The machine implements clearing the counter.
Note:
- All replacement parts are always indicated on the LCD even though their lives do not
reach the end of life.
- The machine returns to the ready state automatically if no panel operation is implemented
for 30 seconds.
Reset
Exit" appears on the LCD; press
or
button and press the OK button.
5-67
button.
Confidential