Brother DCP-9055CDN Service Manual page 65

Error message
No Toner
No Tray
No Waste Toner
Out of Memory
Registration
Rename the File
Replace Belt
Replace Drum
Description
The black toner cartridge is not installed.
The yellow toner cartridge is not installed.
The magenta toner cartridge is not
installed.
The cyan toner cartridge is not installed.
The paper tray 1 is not installed before
printing. (The cassette of the T1 paper
edge sensor is open.)
The paper tray 1 is not installed.
The paper tray 2 is not installed before
printing. (The cassette of the T2 paper
edge sensor is open.)
The paper tray 2 is not installed.
The waste toner box is not installed.
Insufficient memory.
RAM area for secure data full.
The program update process cannot be
performed due to insufficient memory.
Inter-color position alignment adjustment
failure.
(Toner of the color which is being used
reached the end of life.)
Inter-color position alignment adjustment
failure.
(Incorrect measurement value of inter-color
position alignment adjustment.)
Error in the adjustment of inter-color
position alignment result when
implementing it.
Detection of incorrect registration sensor
measurement value when implementing
adjustment of inter-color position
alignment.
Toner of the color which is being used
reaches the end of life when implementing
adjustment of inter-color position
alignment.
There is already a file on the USB flash
memory.
Belt unit is at the end of life.
(The operation is stopped.)
Drum unit is at the end of life.
2-27
Error Refer
codes to:
44 2-49
45 2-49
46 2-49
47 2-49
17 2-35
85 2-66
18 2-36
86 2-67
CE 2-90
C7 2-87
C8 2-87
---
11 2-34
12 2-34
8E 2-72
9D 2-75
9E 2-75
---
7E 2-64
19 2-36
Confidential