Not-Disclosed-To-Users Functions (Function Code 45) - Brother DCP-9055CDN Service Manual

1.4.13 Not-disclosed-to-users functions (Function code 45)

Regarding the not-disclosed-to-users functions, the function setting can be executed by a
simple panel operation.
■ Changing return value of USB No.
<Function>
When the OS of the computer is Windows Vista
through USB 2.0 full speed, the OS might fail to get the serial No. of the USB device
depending on the computer and USB device. When the OS fails to get the serial No., the
return value may continue to increase every time the device is connected to the computer.
To avoid this problem, the return value of the serial No. is dropped to "0".
LCD
USBNo. =ON
USBNo. =OFF
An asterisk "*" appears beside the current setting.
<Operating procedure>
(1) Press the 4 and 5 buttons in this order in the initial state of the maintenance mode.
The "USBNo." will appear on the LCD. Then, press the OK button.
(2) Press the
the OK or Start/Black button.
(3) "Accepted" is displayed on the LCD, and the product goes back to the initial state of the
maintenance mode.
(4) Turn the power switch of the machine OFF.
Note:
This mode is enabled when the power of the machine is turned OFF and ON.
Returns the serial No. of the device. (default)
Returns "0".
or button to select "USB No. = ON" or "USB No. = OFF," and then press
5-28
®
, and the computer is connected to a device
Description
Confidential