Brother DCP-9055CDN Service Manual page 60

Error
Problem
codes
8D Paper jam occurred around the
back cover at the time when the
power was turned ON, or the
back cover is open.
8E Error in the adjustment of
inter-color position alignment
result when implementing it.
8F Detection of abnormal value of
registration sensor sensitivity
when implementing adjustment
of inter-color position alignment.
90 The paper size of the MP tray
does not match that of the print
setting.
91 The paper size of the paper tray
1 does not match that of the
print setting.
92 The paper size of the paper tray
2 does not match that of the
print setting.
93 No paper in MP tray.
94 No paper in paper tray 1.
95 No paper in paper tray 2.
96 No paper in all trays.
97 A paper size, which is not
supported by the paper tray 1, is
specified in the paper size of the
data.
98 A paper size, which is not
supported by the paper tray 2, is
specified in the paper size of the
data.
99 The tray in which unsupported
paper size is loaded is selected
for duplex printing.
9A No paper is loaded in the MP
tray (MP paper empty sensor
fails to be turned ON.)
Refer Error
to: codes
2-71 9D Detection of incorrect registration
sensor measurement value when
implementing adjustment of
inter-color position alignment.
2-72 9E Toner of the color which is being
used reaches the end of life
when implementing adjustment
of inter-color position alignment.
2-72 9F An unidentified error occurred.
A0 Timeout error during waiting for
completion of second side
scanning data transfer.
2-73
A1 The front cover is open.
A2 During scanning, 90 cm or
longer of a document is
2-73
detected.
A3 The document first side rear
sensor does not detect the lead-
2-73
ing edge of a document
although the document is fed
farther than a designated
distance.
2-73 A4 The ADF cover is open.
2-73 A5 Scanning failure upon FAX
transmission (First side)
2-73
(Scanning unit failure for the first
time.)
2-73
2-74 A6 Scanning failure upon FAX
transmission (First side)
(Scanning unit failure for the
second time or later.)
2-74 A7 Scanning color parameter file
failure.
A8 Scanning color parameter error
for recording the image.
2-74
A9 An image signal cannot be
detected when an image is
scanned. Or, an image signal is
too dark.
2-74
AA ADF cover open detection error.
2-22
Problem
Confidential
Refer
to:
2-75
2-75
2-75
2-76
2-76
2-77
2-77
2-78
2-78
2-78
2-79
2-79
2-79
2-79