(5) Remove the two Taptite cup S M3x8 screws and two Taptite cup B M3x12 screws to
remove the Low-voltage power supply unit from the Base frame unit.
Low-voltage power supply unit
Harness routing: Refer to
9.67 Paper Eject Sensor PCB ASSY
(1) Release the Hook to remove the Paper eject sensor PCB ASSY from the Low-voltage
power supply cover.
Low-voltage power supply cover
<A view>
1a
Hook
Pin
Harness routing: Refer to
Fig. 3-210
"
Low-voltage Power Supply PCB ASSY"
Paper eject sensor PCB ASSY
Pin
Hook
A view
1b
Paper eject sensor PCB ASSY
Fig. 3-211
"
Low-voltage Power Supply PCB ASSY"
Base frame unit
Taptite cup S M3x8
Taptite cup B M3x12
1b
1a
3-150
Taptite cup S
M3x8
Taptite cup B
M3x12
<Back side>
Confidential