Brother DCP-9055CDN Service Manual page 443

(4) When "SELECT: TRAY1" is displayed on the LCD, press the
print format, and press the OK button.
The available print formats are shown below.
LCD
SELECT: TRAY1
SELECT: TRAY2
SELECT: MP
SELECT: TRAY1 DX
SELECT: TRAY2 DX
SELECT: MP
(5) The "PAPER FEED TEST" appears on the LCD, and print of the continuous print pattern
with the selected pick-up test items starts.
(6) Press the Stop/Exit button to return to the machine to the initial state of the maintenance
mode.
Note:
- The test printing is stopped until there is no paper in a tray. Press the Stop/Exit button to
stop if you check the paper feeding and ejecting operations. (Printing is resumed when
paper is loaded in the tray.)
- In the case that the error occurs during test printing, the continuous print is terminated. (If
you do not press the Cancel button, printing is resumed when the error is cleared.)
- To clear the error, remove the error factors, and then press the Start/Black button.
DX
5-44
or button to select the
Confidential