Mounting The Control's Circuit Board In The Cabinet; Figure 2. Mounting The Pc Board In The Cabinet - ADEMCO Vista-20HW Installation Instructions Manual

Mounting The Control's Ckuit Board In The Cabiiet (F@ 2)
1.
Hang two short Black mounting clips (provided) on the raised cabinet
tabs (see Detail Bin Fig. 2).
2. Insert the top of the circuit board into the slots at the top of the cabinet.
Make sure that the board rests on the correct row (see Detail A ).
3. Swing the base of the board into the mounting clips and secure the board
to the cabinet with the accompanying screws (see Detail B in Fig. 2).
-13-
Figure 2. Mounting The PC Board In The Cabiiet