ADEMCO Vista-20HW Installation Instructions Manual page 80

4285 Answering
Module Machine Downloading Field *95
Yes
No No Set for value other than "O"(1–15). This
will enable the control panel to answer
the phone call. Otherwise, it will not be
possible to access the 4285 module
Yes Yes No
Set for a value higher than the number of
of rings for which the answering machine
is set. Example: if machine is set for 4
rings, use a value of 5 or higher. This is
recommended so that the 4285 module
can still be accessed if the answering
machine is turned off and does not
answer the phone call.
Yes No Yes
Set for value other than "O" (1–15).
Yes Yes Yes Enter "15" to bypass answering machine.
No No No
Enter "O".
No
Yes
No Enter "O".
No No Yes Enter 1–15.
No
Yes
Yes Enter 15.
*96
INITIALIZE DOWNLOAD ID AND SUBSCRIBER ACCT. No.
FOR DOWNLOADING
(No data entry required, press *96)
*97
SET ALL PROGRAM FIELDS TO DEFAULT VALUES
(No data entry required, pressing *97 automatically loads all
defaults).
TO EXIT
*9g
EXITS PROGRAMMI NG MODE andpreuents re-entry by :
PROGRAMMING MODE
Installer Code + 8 + O + O
(*98 or *99)
*99
EXITS PROGRAMMING G MODE and allows re-entry by:
Installer Code + 8 + O + O or by Power-up then "*" and "#".
-60-