Mounting The Control's Circuit Board Alone In The Cabinet; Mountiog The Pc Board - ADEMCO Vista-20 Installation Instructions Manual

Mounting The Control's Ckuit Board Alone in The Cabiiet @lg. 2)
1. Hang two
short Black
mounting clips (provided) on the raised cabinet
tabs (seeDetail Bin Fig. 2).
2.
Insert the top of the circuit board into the slots at the top of the cabinet.
Make sure that the board rests on the correctrow (seeDetail A ).
3. Swing
the baseof the board into the mounting clips and securethe board
to the cabinetwith the accompanyingscrews(seeDetail B in Fig. 2).
Figure 2. Mountiog The PC Board
-13-