ADEMCO Vista-20HW Installation Instructions Manual page 74

-4ti
*47
*48
-9
*5O
*51
*52
*53
..,.
SECONDARY SUBS ACCOUNT. No. (Partition. 2)
1~/ SecondW Receiver.
See notes previously.
PHONE SYSTEM SELECT Default is O.
•1
m
Enter 1 digit. If Central Station Receiver is not on WATS line:
O= Pulse Dial, 1 = Tone Dial.
If Central Station Receiver is on WATS line:
2 = Pulse Dial, 3 = Tone Dial
REPORT FORMAT Primary Secondary
Determine which format is to be used to report to the central station.
Enter 1 digit (O-9).
O= 3+1; 4+1 ADEMCO Lo Speed Standard (this is the default)
1 = 3+1; 4+1 Radionics Standard
2. 4+2 ADEMCO Lo Speed Standard
3 = 4+2 Radionics Standard
6. 4+2 ADEMCO Express
7 = ADEMCO Contact ID Reporting
8 = 3+1; 4+1 ADEMCO Lo Speed Expanded
9 = 3+1; 4+1 Radionics Expanded
(Enter *as the 4th digit of X3 through *46, if 3+1 dialer reporting is
to be used.)
For an explanation of these formats, see Section 15. SYSTEM
COMMUNICATION .
IVote: The maximum number of alarm and alarm restore reports
during one armed period is determined by field *93.
SPLIT/DUAL REPORTING
u
Enter Oto disable (Backup report only). This is the default.
w
TO PRIMARY
TO SECONDARY
1= Alarms,
Restore,Cancel
Others
2=
All exceptOpen/Close, T est
Open/Close, T est
3= Alarms,
Restore,Cancel
Ml
4=
All exceptOpen/Close, T est
All
5= All All
15-SECOND DIALER DELAY (BURGLARY)
u
If selected, will provide 15-second delay of burglary alarm report to
the central station. Allows time for subscriber to avoid a false alarm
transmission. Enter Ofor no or 1 for yes. Default is O (no delay).
Must be "O"for UL installations.
I
PERIODIC TEST REPORT
•1
Select the desired test report interval.
O= none; 1 = 24 hours; 2 = weekly; 3 = 30 days. Default is O (none).
Test Report Code entered in field *64 is sent.
Reports with Partition 1 Subscriber No.
TEST REPORT OFFSET
n
This is the time to first report from programming or downloading.
O=24 hours; 1 = 6 hours; 2 = 12 hours; 3 = 18 hours. Default is 2.
SESCOA/RADIONICS SELECT
O= Radionics (O-9, B-F reporting)
1 = SESCOA (O-9 only reporting)
Select Ofor all other formats. Default is O.
-74-