Setting Your Ward(S) - Menvier Security TS2500 Operator's Manual

Operation
SYSTEM OPEN
17:30 Sun 01 JAN
? ? ? ? ? ? ?
ENT
0=SET WARDS
A=Next option
0
EXIT FOR WARDS:-
A...............
A...............
17:31 Sun 01 JAN

Setting Your Ward(s)

Setting of wards can only be performed at a
valid remote keypad. If you attempt to set a
ward from an invalid remote keypad the
display will show: Cannot 'SET' from this
keypad.
Before attempting to set your ward, ensure
all doors and windows are securely closed
and the wards to be protected are vacated.
1.
At the remote keypad enter your
passcode.
2.
Press to set your ward(s) or
0
your wards silently.
3.
Leave the area to be protected by the
designated exit route. The internal
sounder will sound.
4.
Close the final door and press the exit
terminator button (if fitted).
5.
When the internal sounder stops the
ward(s) is set.
.
I f the exit tone changes to an alarm
tone, you must re-enter the protected
area and enter your passcode. The
display will show the ward(s) which failed
to set.
to set
8