Menvier Security TS2500 Operator's Manual: Circuits & Wards
Intruder alarm control panel.
Hide thumbs
Advertisement
Overview
Detection Circuits
Wards
Sales Office
Accounts Office
Ward A
Ward B
Workshop
Warehouse
Ward E
Workshop
Ward E
Circuits & Wards
A maximum of 1040 detection circuits can
be monitored by the TS2500 alarm system.
Each circuit is allocated a unique 4 digit
circuit number and a 16 character text
description which is used to identify the
particular circuit. Your alarm company will
have programmed each circuit to respond
in a certain way when the circuit is activated
during the set or unset state.
Wards allow the system to be broken down
into specific areas so that parts of the system
can be set and unset independently, Users
can be given access to all wards or limited
to specific wards. If a user does not have
access to a particular ward they cannot set
or unset that ward.
Ward D
The TS2500 can be broken down into 16
wards, each ward is identified using the
letters A - P. When the system is part set the
display will show which wards are currently
set.
Advertisement
Also See for Menvier Security TS2500
Related Manuals for Menvier Security TS2500
-
Security System Menvier Security ts2500 Quick Manual
1040 zone intruder alarm control system (8 pages)
-
Control Panel Menvier Security TS700 Installation & Programming Instructions
Intruder alarm control panel (32 pages)
-
Control Panel Menvier Security TS400 Installation & Programming Instructions
(24 pages)
-
Control Panel Menvier Security TS790+ Installation And Programming Manual
Menvier security intruder alarm control panels (70 pages)
-
Control Panel Menvier Security TSD402 Installation & User Manual
(10 pages)
-
Control Panel Menvier Security TSD402 User Manual
Intruder alarm control panel & speech dialler (32 pages)
Comments to this Manuals
Latest comments: