Changing Your Passcode - Menvier Security TS2500 Operator's Manual

User Menu 1
SYSTEM OPEN
17:30 Sun 01 JAN
? ? ? ? ? ? ?
ENT
User menu 1
Select option :-
4
User menu 1
Change passcode
ENT
Enter new code..
----
2 5 8 0
e.g.
Enter new code
2580
ENT
User menu 1
Select option :-
ESC
SYSTEM OPEN
17:40 Sun 01 JAN

Changing Your Passcode

This option allows you to change your own
passcode.
1.
At the remote keypad enter your
passcode followed by
ENT
2.
Press
change passcode option.
3.
Enter your new passcode followed by
4.
If your new code is not accepted the
display will show "NOT ACCEPTED try a
different code".
5.
Press
state.
.
I f your system has been configured to
use 6 digit passcodes, the last two digits
of the passcode will always be the last
two digits of your user number, i.e. if you
are user 001. Your passcode will be
????01. If you are user 002, your
passcode will be ????02 etc.
followed by
4
to return the system to its original
]
.
[
to select the
[
.
[