Operating the System
Operating the System
Full Setting the System (AWAY)
Before attempting to fully set the system, the risk of false alarms can be reduced by ensuring that all
detectors are unobstructed and any doors, windows etc. are properly secured.
* If the installation company has configured your system to set using the Final Exit zone (normally
the front door). The display will show: ` USE F. E . ROUTE ' and the system will set when the Final
Exit zone is opened then closed.
4
Full Set (AWAY)
UNSET
Enter first two digits of passcode
then
]
(e.g.,
SECONDS LEFT 030
The exit tone will start and the
display shows the remaining time*
SET
When the exit tone stops, the
system is Full Set
TSD402 User Manual
5 6 ]
)