Menvier Security TS2500 Operator's Manual page 4

Overview
Master User
Modem
Omit
P.A(Panic Alarm)
Part Set
Passcode
Remote Keypad
Reset
Set
System Open
Tamper Alarm
24hr Circuit
Unset
Users
Wards
Glossary of Terms
The user(s) who has the authority for assigning
new users to the alarm system.
A device for transmitting and receiving data to
and from a computer via the telephone line.
To intentionally exclude the monitoring of one or
more detection circuits when setting the alarm
system.
An emergency push button switch used to
activate an alarm. The alarm signal will also be
transmitted to the alarm receiving centre if a
signalling device is fitted to the alarm system.
The state of the alarm system when it is protecting
part of the premises.
A unique number which must be entered before
the alarm system can be operated.
A device located away from the main control
panel that is used to operate the alarm system.
The action required to return the alarm system to
its normal state after an alarm condition.
To arm one or more wards.
The status of the system when all wards are unset.
An alarm caused by the system being physically
interfered with.
A circuit that is monitored at all times.
To disarm one or more wards.
Persons allocated a passcode which allows
them to operate the alarm system.
A group of detection circuits that can be set or
unset independently of each other.