Setting Modes - Menvier Security TS690 Installation & Programming Manual

TS690 & TS690ID Installation Manual
23 Test Call At
This timer is used in conjunction with timer 19, it
controls the hour at which a test call is sent to
central station. For example, if the timer is set to
014 the test call will be signalled at 14.00
(2.00pm). This timer has a working range of 000
- 023. (Default: 003)
LCD
Engineers menu 1
Select Options :-
System Timers
Enter Number >--
Enter timer No.
e.g. 04 for exit time
System Timers
Timer Type
Exit Time... 030
Timer value
Enter new timer value
e.g. 045
System Timers
Exit Time... 045
System Timers Flowchart
Starburst
ENGR 1 -
5
TIMER --
ENT
030
045
ENT

Setting Modes

The setting mode for full set and each part set can
be configured to the following setting modes:
1 Final Exit
The system will set when the "Final Exit" circuit is
activated and after the "Settle Time" has
expired.
LED 2 Exit Terminator
The system will set when the "Final Exit" circuit is
E1 -
activated, the "Exit Terminator" button is
pressed and after the "Settle Time" has expired.
3 Timed Exit
Ti. . - -
The system will set when the "Exit Time" has
expired or if the "Exit terminator" button is
pressed and the "Settle Time" has expired.
4 Instant
The system will set instantly.
030
5 Deferred
As timed exit, however, if any circuits are
activated during the exit procedure the exit
timer is restarted.
045
Set Mode
LCD
Engineers menu 1
Select Options :-
6
Setting Mode ?
Enter Group > -
Enter group:
0
= Full Set
A
= Part Set A
B
= Part Set B
C
= Part Set C
e.g. 0 for full set
Full Set
by Final Exit
Select Set Mode:
1
= Final Exit
2
= Exit Terminator
3
= Timed Exit
4
= Instant
5
= Deferred
e.g. 3 for timed exit
Full Set
by Timed Exit
ENT
Setting Modes Flowchart
Engineer's Menu 1
[1.6]
Starburst LED
ENGR 1 - E1 -
SET.MODE -
S. B Y -
FULL-F.E F-FE
FULL-T.E F-TE
33