Remote Reset - Menvier Security TS2500 Operator's Manual

Operation

Remote Reset

ALARM 2002
15:00.30 01/01
? ? ? ? ? ? ?
ENT
CALL A.R.C. FOR
REM. RESET CODE
? ? ? ? ? ? ?
ENT
- REMOTE RESET -
QUOTE > ????
Enter reply code
? ? ? ? ? ? ?
ENT
- REMOTE RESET -
REPLY > ????
ENT
SYSTEM OPEN
15:30 SUN 01 JAN
Resetting after an Alarm
Full alarms generated in a ward that is
configured as remote reset can be reset by
the engineer or the user via the exchange of
unique passcodes.
From step 5 of "Unsetting after an Alarm".
1.
At the designated remote keypad enter
your passcode.
2.
Every minute the display will inform you
of the action to take (normally "CALL
A.R.C FOR REM. RESET CODE", although
your alarm company can change this
ENT
to more relevant information).
3.
Enter your passcode followed by the
key.
4.
The display will advise you of the number
to quote to your alarm receiving centre.
5.
Contact your alarm receiving centre.
6.
You wi l l b e as ke d to r ep o r t the
circumstances of the alarm. If the alarm
receiving centre decides you do not
require an engineer, a 4 digit remote
reset code will be given to you.
7.
Enter the 4 digit remote reset code
followed by the
return to its normal condition.
key and the system will
[
[