User Menu 1; Introduction - Menvier Security TS2500 Operator's Manual

User Menu 1

SYSTEM OPEN
17:30 Sun 01 JAN
? ? ? ?
User menu 1
Select option :-
A
= Forwards
C
= Backwards
User menu 1
1
Do Bell test
User menu
2
Do Walk Test
User menu 1
3
Use remote reset
User menu 1
4
Change passcode
User menu 1
5
Select chime
User menu 1
6
24hr omit/unomit
User menu 1
7
Omit circuits
User menu 1
8
Silent set wards
User menu 1
0
Set/Unset menu

Introduction

User menu 1 is accessed by entering your
passcode followed by
options and access to these options will
depend on your access level.
ENT
Each option has a "hotkey" and can be
selected by pressing the relevant number,
e.g. "Do Walk Test" is assigned to key
select the weak test option press
by .
[
Alternatively you can use the
scroll forwards and backwards through the
available options. As you press the
keys the bottom line of the display will show
the selected menu option. When you have
found the required option press the
perform the option.
To leave user menu 1 and return the system
to its original state simply keep pressing the
key until the display shows the time and
]
date.
There are 9 menu
[
, so to
2
followed
2
& keys to
A C
&
A
key to
[
C