Cleaning The Lens; Liquid Coolant Maintenance; Liquid Cooler (P/N: 003-100668-Xx) - Christie Roadster S+14K-J User Manual

Section 5: Maintenance
5.3

Cleaning the Lens

Check periodically. A small amount of dust or dirt on the lens has minimal effect on image quality. To avoid
the risk of scratching the lens, clean only if absolutely necessary.
Dust:
1. Brush most of the dust from the lens with a camel-hair brush and/or blow dust away with a dust-free
blower.
2. Fold a microfibre cloth smooth and gently wipe remaining dust particles from the lens. Wipe evenly with
the smooth portion of the cloth that has no folds or creases. Do not apply pressure with your fingers - use
the tension in the folded cloth itself to collect dust.
3. If significant dust is still bound to the surface, dampen a clean microfibre cloth with coated optics cleaning
solution (damp, not dripping). Wipe gently until clean.
Fingerprints, smudges, or oil:
1. Brush most of the dust from the lens with a camel-hair brush and/or blow dust away with a dust-free
blower.
2. Roll a lens tissue around a swab and soak it in coated optics cleaning solution. Tissue should be damp, but
not dripping.
3. Gently wipe the surface using a figure-8 motion. Repeat this motion until the blemish is removed.
5.4

Liquid Coolant Maintenance

5.4.1 Liquid Cooler (P/N: 003-100668-XX)

Check Liquid Coolant Level
1. Remove the 3 stacking mounts, if installed. Refer to
2. Release the 8 quick release screws that secure the top cover.
3. Lift the top cover off and set aside.
4. Locate the Liquid Cooling Module and inspect the liquid level window.
window which indicates the "MIN FILL LEVEL". Refer to
5. If coolant is below the "MIN FILL LEVEL" add more coolant.
5-8
The coolant used in this product contains ethylene glycol. Use caution when handling.
DO NOT ingest. DO NOT use coolant other than those specified by Chrisite for your
projector. Using unapproved coolant can result in projector damage and will void the
warranty.
Section 2.2.2 Installation
NOTE:
Figure 5-11.
J Series 2.0, 2.4, and 3.0kW User Manual
Considerations.
The arrow is next to the
020-100707-01 Rev. 1 (10-2011)